Tuesday, December 29, 2020

Everything You Should Know About Medieval Swords And Their Types


Medieval swords became famous during the 5th to 15th centuries in Europe. These swords lasted during the Medieval period or the middle ages. It started after the fall of the Western Roman Empire.

Medieval swords are also known as a knightly sword, knightly arming sword, or arming sword. A medieval sword was a double-edged, straight weapon with cruciform hilt, single-handed and blade length 70-80cms.

After this brief introduction, we are now going to explain different types of these ancient swords.

Different Types Of Medieval Swords

Different types of medieval swords range from small Broadsword (measuring around 30 inches) to Greatswords (the longest one measuring approximately 72 inches). Have a look at some popular medieval sword types:

1. Broadsword:

This is the earliest type of medieval sword used during the 6th century. The Broadsword featured a two-edged blade, which was 2-3 inches wide over the base and tapered at a point.

The weight of this sword was around 3-5 pounds, and the length range was between 30-45 inches. This weapon was commonly used as a close contact weapon. The primary uses of Broadsword included cutting and slicing the opponent.

2. Greatsword:

These swords were two-handed, large swords. The length of these medieval swords ranged between 50-72 inches.

The handle of this sword measured around 18-21 inches. Hence, the weight of the Greatsword ranged between 6-10 pounds.

It featured an extended handle that allowed the blade to be used in both hands. It was also a close contact weapon that offered the user to strike a massive blow. This weapon was also used for cutting and slicing the opponent.

3. Falchion Sword:

This sword was loved by medieval knights, especially those who were on Crusade. This sword had similar features to the heavy scimitar.

The falchion swords featured heavy, short blades and that too with a single edge. These swords were commonly made from iron and steel. The length of these swords ranged between 37-40 inches.

However, the weight of the falchion sword is around 1-2 pounds. It was also a close contact weapon used for cutting and slicing the opponent in one stroke.

4. Longsword:

Longsword is also termed as Bastardsword, Hand swords, or half sword. The length of these swords ranged between 44-50 inches. The handle of the longsword measured extra 10-15 inches.

The weight of this medieval sword was around 5-8 pounds. The longsword was named so because it had a longer handle and allowed two-handed use with a longer blade.

This medieval sword gained popularity due to extreme thrusting and cutting abilities.

5. Cutting Sword:

These swords were used initially by Medieval knights. Vikings then used the cutting sword commonly. They were commonly used for the slashing stroke.

6. Scimitar:

Saracens were commonly linked with this sword within the Holy Land, where they fought against Crusaders.

It featured a distinct and a curved blade ending along with a sharp point. These swords were commonly used from horsebacks to slice the attackers.

They featured a definite, intense, and curved blade ending. The blade length of this sword ranged between 30-36 inches.

Nevertheless, the design of this sword varied from one or two-handed use. The blow with a scimitar sword could result in an inflicting and severe injury.

The Final Words

Most warriors made medieval swords by hand using steel. During this period, some of the significant bloodiest wars took place.

With time, the medieval sword evolved from a double-edged sword to a diamond-shape, sharper sword that could quickly thrust between rings of chain mail.

So now, you can easily choose a type and grab it from a reputed seller’s store online!


Read Also: Swords For Sale - How Can You Pick Out The Best One?

Sunday, December 20, 2020

4 Video Game Swords To Bring To Real Life


We all are or have been video game fanatics at some point in our lives. Thanks to the 21st century advancement in weapon reconstruction, many of the video game swords we admired or are still madly in love with, can be bought as real life replicas or cosplay foam swords.

The fantasy worlds many video games introduce us to, is packed with adventure, action, revengeful thrill and of course, the slashing and thrashing by our favorite video game sword. It is time to bring the animated world into your real life through the following 4 video game swords we have picked for you.


Legend Of Zelda Replica Sword

The first video game sword on our list has to be this Legend of Zelda sword replica. Nintendo would never have thought that their fantasy game series would unleash hordes of fans for this fantasy sword.

This video game sword replica is fashioned to mirror the original Legend of Zelda sword heavily featured in Legend of Zelda: Four Swords-a superb sequel to the fantasy game series.

This fantasy sword replica features a 27 inch long 440 stainless blade. The blade-embedded with Triforce Seal-insignia has a full metal thickness but is unsharpened making this video game sword an ideal cosplay weapon.

The hilt has a 7.5 inch handle which is a grippy black design with ergonomics to rival any expensive sword. This cheap video game sword has an expensive looking crossguard that dominates the entire fantasy sword.

The steely guard is two-winged with horn-like spikes coming out at either end. The red gemstone stud sits at the center with gold finishes around it as well as at the corners. This signature design from the world of Zelda makes this video game sword a highly covered replica to get your hands on.

This realistic video game sword replica continues its association with the Triforce world by coming with a wooden wall plaque featuring the Triforce seal. You can mount this fantasy sword replica on a wall and display it for the envy of all Zelda fans. Get this video game sword here


Dark Kingdom Fantasy Key Sword

Sony revolutionized the love action video gameplay format with Untold Legends: ark Kingdom. Whether you are a fan of the fantasy game series or not, you would have been enamored with this video game sword for sure at some point.

This fantasy video game sword replica is instantly recognizable for a key design that popularized it amongst video gamers. A sword shaped like a key- this video game sword replica will make a perfect cosplay sword or costume accessory for any fan of the Dark Kingdom series.

This metal key sword has a 26.5" stainless steel blade that ends with a characterlike key-shaped extension towards the point. There are many metal key swords in the animated world out there but this video game sword is one of a kind and so is the foam replica.

The 9" inch handle of this video game sword is-like the entire hilt-made of metal alloy. The grip has foam padding to make the holding of this fantasy sword comfortable. The end of the 'key' is designed to mirror like the blunt edge of an actual key.

From the pommel down you would see a metal chain dangling typical of the key sword in Dark Kingdom. The circular guard has silver/grey accents that provide balance and fantasy allure to this 'key' sword. This video game sword can be bought here


The Oath Keeper Foam Sword

This video game sword is dipped in fantasy elements. If you have been a fan of manga series or the video game spin off, you would love to get this fantasy foam sword right now.

The video game sword is a foam replica of the real deal and is made from 10mm thick pure polyurethane foam. The foam sword will go right with any cosplay event as the highly embellished and stylized fantasy sword in your hand will surely turn many heads your way.

The 35" long foam sword replica is designed by hand to replicate the video game series. This video game sword is also a key sword which was a companion to another key sword  Passing Memories series. The two hearts painted on this foam sword are a testament to that, 

This video game sword is thick with 1 inch width going all the way to the handle. Two angel wings on the handle match the two bat wings on the companion sword of this fantasy sword. The 'light' or kanji complement the 'darkness'. 

The exquisite detailing on this video game foam sword will make you stand out with it as a cosplay weapon or just to show off your fantasy sword collection to your friends. Get it here


Blades Of Chaos Foam Replica Sword

If you are a fan of God of War, video game series-the action adventure gameplay of the Sony's classic video game can be transported right to your living room with this foam sword replica.

This foam video game sword is an exact replica of the blades of chaos-the weapon forged in the dark underbelly of Underworld by the God of War himself-Ares. Greek mythology is not complete without some family drama, and this video game sword is a proof of that.

Channel your inner ravaged Spartan warrior, Kratos, as he swings the blades of chaos on his arms and avenge the death of his family. This video game sword is loaded with hardships and angst common to all Greek tragedies.

The foam replica of blades of chaos has each sword 17.5" long with 11" inches of blade. Outer core of this video game sword is made from polyurethane foam and the inner core from PVC. This sword replica is an ideal cosplay item for any fantasy game related themed event.

The deathly metal chain that connects the blades of chaos together is modelled as plastic here. This makes the video game sword really safe to be held and swung around by children. Give your kid this fantasy foam sword as a present and cosplay the greek drama right in your room. Buy it here

Read Also: Top 3 Zoraki Blank Guns Under $100

Wednesday, September 23, 2020

5 Most Popular Swords Among Modern Enthusiasts


Swords are bladed weapons used for warfare in the past. In modern days, they have been adopted as collectible items and training weapons. Also, there are different types of swords in modern days. 

When you explore the market today, you can quickly find some exceptional and gorgeous swords that look completely different from real swords. When we talk about a real sword, we mean a sword that has a stainless steel or carbon steel blade. 

However, modern enthusiasts use other types of swords that are safe for use. Following are the five most popular types of swords among modern enthusiasts:


1. Anime Swords

Anime swords are the most popular types of swords in 2020. These are the swords that belong to the anime world and the anime characters. These are the superhero characters from the imaginary world and the enthusiasts today are fans of these characters and love to collect their swords.


2. Full Tang Swords

As the name suggests, these are the swords with full tang blades. People love these swords because they are believed to be very powerful. These have strong and durable blades and last longer than other swords. Also, these are often handmade or hand forged swords with extreme efficiency. These look the real swords. 


3. Samurai Swords

Modern enthusiasts are fans of samurai warriors, They love to collect their swords. One of the most popular swords that belongs to the samurai is the katana sword. This is a sword with a long and thick blade and there is a small and important curve on the blade too. 


4. Ninja Swords

Modern enthusiasts also love the ninja warriors. These are the ancient Japanese warriors who are even more popular today. Their swords are called ninja swords and the finest swords for fighting. Today, these are mere collectible swords. Sometimes, they are used for training purposes. 


5. Medieval Swords

Medieval swords are among the real swords these days. These swords belong to the medieval knights and are very popular nowadays. People collect their swords as these are historical  bladed weapons used in some renowned wars. These swords are mostly used for décor and for cosplay purposes by the roleplayers. 


Read Also: Buy The Best Pocket Knife For Doing Various Routine Tasks

Friday, May 29, 2020

What are Samurai Swords? What You Need to Know!

 Samurai Swords
Samurai swords are the most popular swords in 2020. These are the finest swords ever constructed. They belong to the great samurai warriors who belong to ancient Japan. 

These swords are even popular today even though hundreds of years have passed. Are you a fan of the samurai warriors? If yes, get their swords in your collection. Before that, there are some important things you need to know! 


The Samurai Katana Sword

A samurai sword is also called a katana sword. It has a long and thick blade and there is a small curve on the blade. At the bottom of the blade, there is a small curve. This small curve is not too huge and is enough to make it a badass fighting sword. 


The Ninja Katana Sword

There is another katana sword that belongs to the ninja warriors. This is very much similar to the samurai sword. It also has a long and thick blade. However, there is no curve on the blade. Not even a small one! The blade is a dead straight one. 


The Samurai Traditions

The samurai sword became a part of the samurai traditions. They considered it an essential carry. Every samurai always had a sword around his shoulder. There was a rare occasion when he did not have a sword hung around his shoulder. 


The Real Fighting Sword

A katana sword is a real fighting sword and served mainly as a fighting sword during wars. The samurai used it as a fighting weapon. In fact, the primary fighting weapon. So, this is a real fighting sword. 


The Greatest Collectible Sword

For enthusiasts, there is no better collectible than a samurai sword. This is the greatest sword of all time and for enthusiasts, it is a must-have sword. Are you an enthusiast? Get a samurai katana sword in your arsenal and determine your enthusiasm!

Monday, September 2, 2019

The 7 Most Iconic Real Swords of All Ages



Real swords have always been considered as a sign and symbol of bravery and honor especially. Although swords were the primary weapons with which people used to arm themselves before the invention of firearms yet the most iconic swords were made during the Medieval era which ranges between the 5th and 15th centuries. Swords are an equal part of both the real and mythical world and are one of the most sought after weapons even today, even though it may be just for collection purposes. 

Some of these real swords for sale even have interesting stories revolving around them which we, being the people of a scientific and technological advanced world may find to be fictional and absurd but the local folks of that time, considered them to be true and magical. Let us have a look at some of these real swords with mysterious stories spinning around them. 

1- The Excalibur 

The Excalibur is the name of the sword that belonged to King Arthur. This sword has a legendary history which states that the sword made King Arthur a legendary king when he pulled the sword out of stone in a forest. The sword could only be pulled out of that stones by its true wielder and no matter who else tried to pull it, it didn’t budge a little, let alone come out. 

The sword was known to have special and magical powers. According to the local folklore, King Arthur asked Sir Bedivere to throw the Excalibur into the lake where the Lady of the Lake drew out her hand and took the sword. It is believed according to the legend that one day King Arthur will come back wielding his sword when his dear country will need him. 

2- Kusanagi-no-Tsurugi

This sword is of Japanese origin and has a legendary history as well. It has the same rank among real swords as that of Excalibur, King Arthur’s sword. The original name of the sword was Ame-no-Murakumo-no-Tsurugi which in the English means “The Sword of the Gathering Clouds of Heaven”. Later on, it was given the name of Kusanagi-no-Tsurugi which in the English means “The Grass Cutting Sword”. 

The legend behind it says that there was a family who had eight daughters. A serpent with eight heads had killed seven of their daughters and was coming for the last one. Susanoo, the God when saw the grief of this family, came forward to help them. He planned a bait for the serpent and asked the family to put eight vats of Japanese wine on eight different places behind a fence. 

The fence had eight gates and when the serpent came for the bait, he inserted each of its eight heads through each one of the gates and when he did that, Susanoo chopped off each of its head and when he started to chop off its tails as well, he found the sword in one of them and then gave it the name of Ame-no-Murakumo-no-Tsurugi.

3- Colada and Tizona

Colada and Tizona are two swords of Spanish origin. These real swords belonged to Spain’s military leader and nobleman who won it from King Yucef who was the previous owner of the swords. He then gifted the sword to his sons in law but when they mistreated his daughters and abused them, he asked for his gifts to be returned. He then gave the swords to one of his knights and one of the real swords known as Colada is still on display in the Royal Palace of Madrid, Spain. 

4- Durandal 

Durandal belonged to Charlemagne. It is believed than an angel gave this sword to him and later on the sword was passed onto Roland. The Song of Roland clearly states this story. This sword is one of the sharpest ones among all real swords and is kept inside its hilt of golden color. 

5- Shamshir-e-Zomorrodnegar

The name of the sword basically speaks of its Persian origin. There is a Persian legend known by the name of “Amir Arsalan.” According to this legend, there as an evil demon with horns on whom no weapon could work except this one. Therefore, the sword had magical powers to finish off this evil. 

It is also said that the original owner of this sword was King Solomon and he kept this sword heavily guarded. There was one more interesting myth about this sword and that is that whenever someone was hurt with this sword, the wound inflicted had only one anecdote which was a potion made from a variety of special ingredients and one of the ingredients was the brain of the horned demon itself. 

6- Goujian

Goujian has a very interesting history. The sword belongs to emperor Goujian who reigned in China. The sword is said to be buried underground for over two thousand years but despite this fact when it was taken out, it looked just like a new sword. The blade of the sword features some writing on it as well, just near the handle. The exact words are, “The Sword belongs to Goujian, the King of Yue State.” 

7- The Claymore

The Claymore is another one of the famous real swords. It is the sword of Scottish figure, Sir William Wallace who led the anti-fascist resistance against the English rulers. It was a time when the War of Independence was going on in Scotland. The Claymore was used at numerous other battles as well i.e. the Battle of Falkirk and the Battle of Stirling as well. The sword features double edges and is a long and magnificent sword. Only a really tall person with a good stature could properly wield the sword due to its length. The Claymore is one of the most magnificent real swords of all time. 

The above-mentioned real swords are one of the most famous swords of all time and have quite a few interesting legends spinning around them. Some of them are even available in stores nowadays and can be bought at quite reasonable rates. People usually buy them for collection and display purposes and some high quality and expensive real swords are even passed down to the next generations as family heirlooms.

Wednesday, April 3, 2019

What are some Amazing Facts about the Cutlass Sword?


The historical analysis indicates that the pirates were the wielders of some amazing swords, including the amazing cutlass sword. When it comes to naming some of the amazing good-quality swords that were carried on the high seas as well as the flatlands, the cutlass sword is remembered as well. In fact, the pirates weren't the only ones who were fond of the cutlass sword; this sword was equally popular among the common sailors as well. Referring to the design of the cutlass sword, it is known to be one of the categories of the short-sized swords; in addition, the cutlass sword was carried a French terminology "the cuttoe", which means a short-sized sword which includes a blade resembling the blade of a machete. Until the year of 1800, the cutlass sword was more commonly referred to as the "hanger"; however, later on, it earned its now-famous name of the "cutlass sword".

The Unique Design of the Cutlass Sword

Some analysts consider the cutlass sword to be the descendant of the famous sword wielded in the medieval era; the falchion sword. However, despite the fact that the cutlass swords, as well as the falchion sword, comprise shorter-sized blades of broad width; yet, the cutlass sword does not comprise an “angular-shaped tip of the sword blade" which bears a striking resemblance to the medieval falchion. Referring to the unique design of the cutlass sword, it can be analyzed that the sword comprised a hand-guard designed as a simple basket. 

The hand-guard of the sword could also exist in the form of a simple "d-guard"; some variations of the cutlass sword had minor embellishments engraved on the hand-guard which offered slightly more material for hand-protection in contrast to the simpler versions of the cutlass sword. Typically, the sword hilt was constructed out of the material of brass as it offered more resistance to the buildup of corrosion and rust which was inevitable due to the presence of seawater.

How did the Pirates make an Effective Use of the Cutlass Sword?

With respect to the strong and sturdy design of this sword, the blade was generally viewed as a good slashing or stabbing weapon. The design of the blade of the cutlass sword increased the efficacy of the sword; the blade was not only curved but also had the perfect width to it which coupled with the short length of the blade made it perfect for stabbing and thrusting purposes. The design of this pirate sword enhanced the strength of the sword; subsequently, apart from serving as an effective combat sword, it was also used for creating pathways on unvisited islands by slashing through the wilderness and bushes.


This short pirate sword was loved by all. The machete-style pirate sword serves as a multi-functional tool for the wielders of the cutlass sword. Not to mention the fact that the scarcity of cannons and guns, lead to close-body fights among the pirates and soldiers. In this way, the cutlass sword also served as an effective weapon for CQBs. Apart from using this pirate sword during fights and clearing the wilderness; these short-sized swords also came in handy for the performance of everyday tasks, such as the cutting of ropes on the deck; cutting through the canvas, and even cutting through wooden logs. Hence, the cutlass sword was essentially a multi-functional tool for the pirates at that time.

The Popularity of the Cutlass Sword

Without a doubt, much of the credit of the popularity of the cutlass sword goes to the pirates. Some of the famous pirates of the time were William Kidd and William Fly. The historical analysis indicates that this famous pirate sword was in use by the pirates until the year 1667. Those were the times when the wielders of this pirate sword were well aware of the usefulness of it which means that they know what part of the sword to use for which purpose. It wouldn't be wrong to state that the cutlass sword served as the EDC knife of the time. The pirates knew how to take full advantage of their sword while hacking their way through a dense forest; cutting through ropes, and using the cutlass sword during the numerous battles.